System SP Table-2
D009/D011/D012/D013/D091/D092 4-34 SM Appendix
002
Lower Limit
[0 to 100 / 52 (C1b/C1.5b), 57 (C1c/C1.5c) /
1vol ]
Defines the lower limit for grayscale.
A smaller value allows a wider range of halftones at the dark end of the
scale.
2973*
Grayscale Cycle (SSP) [0 to 1000 / 100 / 10 sheets ]
Set s the halftone operation interval in order to prevent deterioration of the
OPC. If the number of copies exceeds this setting, at the end of the job, or if
the door is opened and closed, charge correction is executed.
2974* Image Density
001
Adjustment Mode
[1 to 5 / 3 / 1 ]
Adjusts image density. Changing this setting adjusts development bias and
ID sensor output voltage that in turn raises or lowers image density.
2975*
Near End Setting
Detection Time
[0 to 2000 / 0 / 10 sec ]
Sets a time for toner supply motor rotation for issuing the toner near end
warning on the operation panel. The time may need to be shorter for
customers who run especially large print jobs (working at night, for example)
to ensure earlier warning of the toner near end condition so toner out does
not interrupt a long job.
To Next Page
Loading...
