Ricoh MP C307

3.Troubleshooting
37
Code Meaning Suggested Cause/Action
• The TIFF format of the attachment is corrupted.
• Software error.
15-
71
Not Binary Image Data
• The file could not be received because the attachment
was not binary image data.
15-
73
MDN Status Error
• Could not find the Disposition line in the header of
the Return Receipt, or there is a problem with the
firmware.
15-
74
MDN Message ID Error
• Could not find the Original Message ID line in the
header of the Return Receipt, or there is a problem
with the firmware.
15-
80
Mail Job Task Read Error
• Could not receive the transmission because the
destination buffer is full and the destination could not
be created (this error may occur when receiving a
transfer request or a request for notification of
reception).
15-
81
Repeated Destination Registration Error
• Could not repeat receive the transmission because the
destination buffer is full and the destination could not
be created (this error may occur when receiving a
transfer request or a request for notification of
reception).
15-
91
Send Registration Error Could not receive the file for transfer to the final
destination:
• The format of the final destination or the transfer
destination is incorrect.
• Destinations are full so the final and transfer
destinations could not be created.
15-
92
Memory Overflow
• Transmission could not be received because memory
overflowed during the transaction.
15-
93
Memory Access Error
• Transaction could not complete due to a malfunction
of SAF memory.
15-
94
Incorrect ID Code
• The machine rejected an incoming e-mail for transfer
request, because the ID code in the incoming e-mail
did not match the ID code registered in the machine.
15-
95
Transfer Station Function
• The machine rejected an incoming e-mail for transfer
because the transfer function was unavailable.
16-
00
No IP address registered
• The machine does not get an IP address because the
DNS server has not been registered for the remote
machine or IP address of the remote machine has not