Ricoh SP 3710DN - Fusing Lamp

Fusing and Exit
SM 4-67 M0C3/M0C4/M0C5/M0C6/M0C7
Replacement
and
Adjustment
4.9.5 FUSING LAMP
1. Remove the fusing unit (Fusing Unit).
2. Remove the fusing side covers [A] (
x 2 each).
3. Turn the fusing unit over.
4. Remove the screws on both sides (
x 1 each).
Hold the terminal and flat nut with your finger firmly. Otherwise, the lamp secured together
with the flat nut moves with rotation of the screw, which causes the lamp to break.