Ricoh SP 3710DN - To Print the Test Pattern

Reports
SM 5-61 M0C3/M0C4/M0C5/M0C6/M0C7
System
Maintenance
To Print the Test Pattern
For information on how to enter the "Maintenance Mode (SP mode)", contact the supervisor in
your branch office.
For Four-Line LCD Models
1. Enter the "Maintenance Mode (SP mode)".
2. Press the [
] or [ ] key to select [Engine Maintenance], and then press the [OK] key.
3. Press the [
] or [ ] key to select [Test Pattern], and then press the [OK] key.
The three test pattern pages are printed.
For Touch Panel Models
1. Enter the "Maintenance Mode (SP mode)".
2. Press [Engine Service Setting].
3. Press [Test Pattern].
The three test pattern pages are printed.
Test Pattern Examples