Ricoh SP 3710DN - Test Page; To Print the Test Page

Reports
SM 5-59 M0C3/M0C4/M0C5/M0C6/M0C7
System
Maintenance
Application counters exist for each individual primary machine function (Printer, Scanner, Copier,
Facsimile, and paper misfeed), and are incremented by the main board each time the board
issues a print request for the function in question.
The application counters are set to 0 if you select "Factory Default" in the "Maintenance Mode
(SP mode)".
Special Sender list
5.5.4 TEST PAGE
When you check an image problem or other problems, it might be necessary to print a test page.
Follow the test page print procedure below to print a test page.
To Print the Test Page
For Printer Models
1. Press the [Menu] key.
2. Press the [
] or [ ] key to select [Printer Features], and then press the [OK] key.
3. Press the [
] or [ ] key to select [List/Test Print], and then press the [OK] key.
4. Press the [
] or [ ] key to select [Test page], and then press the [OK] key.
The test page is printed.