Ricoh SP 3710DN - Hot Roller Stripper Pawls; Paper Exit Sensor

Fusing and Exit
SM 4-69 M0C3/M0C4/M0C5/M0C6/M0C7
Replacement
and
Adjustment
4.9.6 HOT ROLLER STRIPPER PAWLS
1. Remove the fusing unit (Fusing Unit).
2. Remove the fusing upper cover (Fusing Upper Cover).
3. Remove the metal holders [A] (1 holder for each pawl:
x 2 each).
4. Remove the hot roller stripper pawls [A] (1 spring for each pawl).
4.9.7 PAPER EXIT SENSOR
1. Open the rear cover.
2. Remove the paper exit sensor [A].