Capturing the Debug Logs
SM 5-73 M0C3/M0C4/M0C5/M0C6/M0C7
Maintenance
Debug Item List:
Item name Description
Get Memory When this item is selected, Start Address, Size, and the unit (bytes, Kb, or
Mb) can also be selected. Start Address and Size should be smaller than the
total engine memory size.
Get Flash When this item is selected, Offset, Size, and the unit (bytes, Kb, or Mb) can
also be selected. Offset and Size should be smaller than the total engine
flash memory size.
Get Debug
Message
Get the debug log data from the log buffer.
The log buffer is set to 3000 lines by default for MF models and 2000 lines by
default for P models.
Get Event
Log
Get the log data from the event buffer.
Get Error Log Get the log data from the error buffer.
Clear Error
Log
Reset the error buffer to erase all data from the flash memory.
Set Panel
Language
Set the panel supported language list.
To Next Page
Loading...
