Fusing and Exit
SM 7-41 M0C3/M0C4/M0C5/M0C6/M0C7
Descriptions
[A]: Thermostat: Operation stops when the temperature surrounding the hot roller is more than
185°C.
[B]: Fusing thermistor: SC543 will be generated when the surface temperature of the hot roller
is more than 235°C.
[C]: Non-contact thermistor: SC553 will be generated when the surface temperature of the hot
roller is more than 220°C.
Paper Exit
The paper exit guide-plate [A] holds down the trailing edge of each sheet of paper after it exits in
order to prevent it from obstructing following sheets of paper as they exit.
To Next Page
Loading...
