Ricoh SP 3710DN - Fax Error Codes; Fax Error Code Structure

Fax Error Codes
M0C3/M0C4/M0C5/M0C6/M0C7 6-20 SM
6.4 FAX ERROR CODES
6.4.1 FAX ERROR CODE STRUCTURE
This section describes the dial, transmission (TX), and reception (RX) error codes that are
printed on the TX Report/Activity Report.
Error codes consist of six hexadecimal digits (0-5).
Digit 5 (far left) TX or RX
1xxxxx TX (Fax)
2xxxxx RX (Fax)
Digit 4 Coding (MH/MR/MMR/JBIG)
x1xxxx MH
x2xxxx MR
x3xxxx MMR
x4xxxx JBIG
Digit 3 Modem mode
xx1xxx V27ter non-ECM
xx2xxx V29 non-ECM
xx3xxx V17 non-ECM
xx4xxx V33 non-ECM
xx5xxx V34
xx9xxx V27ter ECM
xxaxxx V29 ECM
xxbxxx V17 ECM
xxcxxx V33 ECM
Digit 2 Modem speed
xxx1xx 2400
xxx2xx 4800
xxx3xx 7200