Ricoh SP 3710DN - Engine Service Setting

Maintenance Mode (for Touch Panel Models)
SM 5-15 M0C3/M0C4/M0C5/M0C6/M0C7
System
Maintenance
Menu Description
Jam Counter Jam Total Displays the number of paper jams at each location.
ADF
Printer Out Bin
Internal
Tray1
Tray2
Duplex
WiFi Channel Type Displays the WiFi channel type.
Engine Service Setting
Menu Description
PnP Name
DFU (Designed for Factory Use).
[0x00 to 0x7F]
Destination
DFU
Sets the destination and updates the engine setting.
[DOM/ NA/ EU/ ASIA/ CHN/ TAIWAN]
Brand ID
DFU
Displays the current brand ID number.
[0x00 – 0x7F]
Registration Horiz. Tray1
Adjusts the horizontal registration for each tray and paper type. If
the machine settings are reset to the factory defaults, this value
does not change.
[-40.0 to 40.0 / 1.0 (Default) / 0.1 mm/step]
Vert. Tray1
Plain
[-40.0 to 40.0 / 17.0 (Default) / 0.1 mm/step]
Vert. Tray1
Thick
[-40.0 to 40.0 / 17.0 (Default) / 0.1 mm/step]
Vert. Tray1
Thin
[-40.0 to 40.0 / 17.0 (Default) / 0.1 mm/step]
Horiz. Tray2 [-40.0 to 40.0 / 2.0 (Default) / 0.1 mm/step]
Vert. Tray2
Plain
[-40.0 to 40.0 / 17.0 (Default) / 0.1 mm/step]