Laser Exposure
M0C3/M0C4/M0C5/M0C6/M0C7 7-22 SM
7.6.2 MECHANISM
Synchronization Detector
The mirror reflects the beam from the LD unit to the synchronization detector.
Automatic Power Control (APC)
The LD driver on the LD drive board automatically controls power for the laser diodes. The laser
diode power is adjusted at the factory.
LD Safety Mechanisms
Laser Safety Switch: There are safety switches on the front and rear covers. These switches
stop the laser while the cover is open. If the user opens one of these covers, the +5VLD power
to the laser diodes is stopped.
To Next Page
Loading...
