Technical Tips
SM Appendix 2-11 M0C3/M0C4/M0C5/M0C6/M0C7
PaaS (Only for
2.4 TECHNICAL TIPS
• Only execute the “Factory Default” when it is necessary. If the machine is reset by the
Factory Default operation, the PaaS settings will be reset and deleted.
In the event that the Factory Default is executed, set the PaaS again through the procedure
in "Overwrite Registration on Server".
• Unless PaaS registration is completed by the PaaS platform server, and the message
“Operation Successful” appears on the Web Image Monitor, Print/Fax/Scan/Copy can only
use up to 100 pages, and if over 100 pages are used, the applications will become
unusable.
However, if just one job containing more than 100 pages is performed, the job will be
completed.
• Never change the PaaS Validity Setting to inactive without unregistering PaaS. For the
unregistration process, refer to "Unregistering PaaS".
To Next Page
Loading...
