Ricoh SP 3710DN - System

Smart Organizing Monitor (SOM)
M0C3/M0C4/M0C5/M0C6/M0C7 5-36 SM
Group Item Selections Remarks
Horizontal * step to +5.1 mm.
Adjustment
Vertical *
(-15 to +15)
step
0.24 mm per step. Range is -3.6 mm
to +3.6 mm
Registration Tray 2
Print Test Sheet
-
Sends a PCL command to the printer
to print a test sheet.
It is disabled when tray 1 is not
installed.
Adjustment
Horizontal *
(-15 to +15)
step
0.34 mm per step. Range is -5.4 mm
to +5.1 mm.
Adjustment
Vertical *
(-15 to +15)
step
0.24 mm per step. Range is -3.6 mm
to +3.6 mm
Registration
Bypass Tray
Print Test Sheet - Sends a PCL command to the printer
to print a test sheet.
Adjustment
Horizontal *
(-15 to +15)
step
0.34 mm per step. Range is -5.4 mm
to +5.1 mm.
Adjustment
Vertical *
(-15 to +15)
step
0.24 mm per step. Range is -3.6 mm
to +3.6 mm
Registration Duplex
Tray
Print Test Sheet - Sends a PCL command to the printer
to print a test sheet.
Adjustment
Horizontal *
(-15 to +15)
step
0.34 mm per step. Range is -5.4 mm
to +5.1 mm.
Adjustment
Vertical *
(-15 to +15)
step
0.24 mm per step. Range is -3.6 mm
to +3.6 mm
*: If the machine settings are reset to the factory defaults, this value does not change.
System