Smart Organizing Monitor (SOM)
SM 5-35 M0C3/M0C4/M0C5/M0C6/M0C7
Maintenance
Item Selections Remarks
Custom
Paper Size:
Vertical
one digit after the decimal
point in mm.
If an input value is more
than the maximum value,
then it will be treated as
the maximum value.
If an input value is less
than the minimum value,
then it will be treated as
the minimum value.
Tray Priority:
Default Tray
Tray1 */ Bypass Tray -
Bypass Tray
Priority
Machine Setting(s)/ Any Size/Type/ Any Custom
Size/Type
-
Size
Mismatch
Detection
On / Off* -
*: Default
Maintenance
Group Item Selections Remarks
Registration Tray 1 Print Test Sheet
-
Sends a PCL command to the printer
to print a test sheet.
Adjustment (-15 to +15) 0.34 mm per step. Range is -5.4 mm
To Next Page
Loading...
