Ricoh SP 3710DN - Page 139

Maintenance Mode (for Four-line LCD Models)
SM 5-5 M0C3/M0C4/M0C5/M0C6/M0C7
System
Maintenance
Menu Description
Motor
Dup Motor
Normal
Output check (Duplex motor normal)
Dup Motor
Revers
Output check (Duplex motor reverse)
EM Life Display
DFU (Designed for Factory
Use)
Sets whether to display an alert when each EM parts yield of this
machine is reached.
[On or Off (Default)]
SC559 Detection [On or Off (Default)]
Clear Engine Memory Resets the engine settings stored in the EEPROM to factory
default.
Total Counter Info Displays the total counter (Engine).
EM Counter
Info
Transfer
Roller - Time
Displays the EM counter (Transfer Roller: Time).
Paper Feed
Roller –
Pages
Displays the EM counter (Paper Feed Roller: pages).
Fusing Unit -
Time
Displays the EM counter (Fusing Unit: time).
Transfer
Roller -
Pages
Displays the EM counter (Transfer Roller: pages).
Fusing Unit -
Pages
Displays the EM counter (Fusing Unit: pages).
Transfer
Roller
Remain
Displays the remainder until the service life (Transfer roller: %)
Paper Feed
Roller
Remain
Displays the remainder until the service life (Paper feed
roller: %)
Fusing Unit
Remain
Displays the remainder until the service life (Fusing unit: %)
OPC Life Info OPC
Rotation
Time
Displays the OPC life information (OPC rotation time).
Pre-OPC
Rotation
Displays the OPC life information (Pre-OPC rotation time)
⇒
R
ev. 10/17/2018