Ricoh SP 3710DN - Page 152

Maintenance Mode (for Touch Panel Models)
M0C3/M0C4/M0C5/M0C6/M0C7 5-18 SM
Menu Description
Paper
Vert .Tray1
Plain Paper
[-8 to 8 / -2 (Default) / 1mm/step]
Vert .Tray1
Thick Paper
[-8 to 8 / 0 (Default) / 1mm/step]
Vert .Tray1
Thin Paper
[-8 to 8 / -2 (Default) / 1mm/step]
Vert .Tray2
Plain Paper
[-8 to 8 / -2 (Default) / 1mm/step]
Vert .Tray2
Thick Paper
[-8 to 8 / 0 (Default) / 1mm/step]
Vert .Tray2
Thin Paper
[-8 to 8 / -2 (Default) / 1mm/step]
Vert .Dup.
Plain Paper
[-8 to 8 / 0 (Default) / 1mm/step]
Vert .Dup.
Thick Paper
[-8 to 8 / 0 (Default) / 1mm/step]
Vert .Dup.1
Thin Paper
[-8 to 8 / 0 (Default) / 1mm/step]
Output Check Main Motor Output check (Main motor)
Middle Clutch Output check (Relay clutch)
Tray1 Clutch Output check (Paper feed clutch)
Bypass
Solenoid
Output check (By-pass feed solenoid)
Regist Clutch Output check (Registration clutch)
Fan High
Speed
Output check (Cooling fan high speed)
Fan Low
Speed
Output check (Cooling fan low speed)
Erase Lamp Output check (Quenching lamp)
Polygon
Motor
Output check (Polygon mirror motor)
Dup Motor
Normal
Output check (Duplex motor normal)
Dup Motor
Revers
Output check (Duplex motor reverse)
EM Life Display
Sets whether to display an alert when each EM parts yield of this