Ricoh SP 3710DN - Page 183

Smart Organizing Monitor (SOM)
SM 5-49 M0C3/M0C4/M0C5/M0C6/M0C7
System
Maintenance
Group Item Remarks
Registration Roller: Tray 2 Paper
Vertical: Thick
Paper
[-8 to 8 / 0* / 1 mm/step]
Vertical: Thin
Paper
[-8 to 8 / -2* / 1 mm/step]
Amount of Paper Buckle at the
Registration Roller: Bypass Tray
Vertical: Plain
Paper
[-8 to 8 / -2* / 1 mm/step]
Vertical: Thick
Paper
[-8 to 8 / 0* / 1 mm/step]
Vertical: Thin
Paper
[-8 to 8 / -2* / 1 mm/step]
Amount of Paper Buckle at the
Registration Roller: Duplex Tray
Vertical: Plain
Paper
[-8 to 8 / 0* / 1 mm/step]
Vertical: Thick
Paper
[-8 to 8 / 0* / 1 mm/step]
Vertical: Thin
Paper
[-8 to 8 / 0* / 1 mm/step]
Fusing Temperature Plain Paper
Adjusts the fusing temperature for each
paper type.
[150 to 200 / 175* / 1°C/step]
Thick Paper 1 [170 to 200 / 185* / 1°C/step]
Thin Paper [155 to 180 / 170* / 1°C/step]
Envelope [170 to 200 / 185* / 1°C/step]
Thick Paper 2 [175 to 200 / 185* / 1°C/step]
Recycled [160 to 180 / 170* / 1°C/step]
Standby
Mode
[120 to 175 / 155* / 1°C/step]
Low Power
Mode
[80 to 135 / 120* / 1°C/step]
SC559 Detection [On or Off *]
Print Test Pattern Prints the test pattern.
Refill Mode Setting
[Auto refill mode */ Pure refill mode]
DFU
Handling Mode on "Waste Toner full" of the refilled
AIO
Sets the machine operation at "waste toner
full" of the refilled AIO.
[On or Off *]