Ricoh SP 3710DN - Page 221

Error Messages
SM 6-13 M0C3/M0C4/M0C5/M0C6/M0C7
Troubleshooting
Message Causes Solutions
document in parts as several
smaller individual faxes, or to
send at a lower resolution.
ADF Original Misfeed
Open ADF Cover and
remove paper.
An original has jammed
inside the ADF.
• Remove jammed originals, and
then place them again.
• Check the originals are suitable
for scanning.
ADF Orig. Misfeed
Open ADF Cover and
remove paper.
Available: IDCard Copy
A4/A5
SEF/A6/8.5×11/5.5×8.5
ID card copy could not be
performed because the tray
does not contain the valid
sizes of paper, which are A4,
Letter, A5, 5.5×8.5 inches, or
A6 size.
• Set the machine to print copies
using A4 or Letter size paper in
the [Select Paper] settings.
• Specify A4 or Letter size paper for
the tray selected for printing
copies.
Available: 2 Sided Copy
A4, LG, LT, 8×13, 8
1/4×13, 8 1/2×13, 16K
Only when using the touch
panel models.
2-sided copying could not be
performed because the tray
does not contain a valid size
of paper, which are A4,
Letter, Legal, 8 × 13 inches, 8
1
/
2
× 13 inches, Folio, or 16K.
• Select the tray containing A4, B5,
Letter, or Legal size paper in the
[Select Paper] setting.
• Specify A4, Letter, Legal, 8 × 13
inches, 81/2 × 13 inches, Folio,
or 16K size for the tray selected
for printing copies.
Available: 2 Sided Copy
A4/LG/LT
Only when using the four-line
LCD models.
2-sided copy could not be
performed because the tray
does not contain a valid size
of paper, which are A4,
Legal, or Letter.
• Select the tray containing A4,
Letter, or Legal size paper in the
[Select Paper] setting.
• Specify A4, Letter, or Legal size
for the tray selected for printing
copies.
Busy Fax transmission could not
be completed because the
destination's line was busy.
Wait for a while and send the fax
again.
Cannot Copy This Setting Combined copying could not
be performed because the
• Set the machine to print copies
using A4, Letter, or Legal size