PaaS Setup Procedure
M0C3/M0C4/M0C5/M0C6/M0C7 2-4 SM Appendix
Item Description
-Digest
The default value is “None”.
When “Basic” or “Digest” is selected, the User Name and Password can
be edited and should not be left blank.
When “None” is selected, the User Name and Password are read only.
User Name
The account connecting to the proxy server.
Use ASCII characters only. The max. length is 32.
Password
The password for the user name connecting to the proxy server.
Use ASCII characters only. The max. length is 32.
7. After entering the information, click [OK].
8. If the message “Operation Successful” appears, PaaS registration is complete. For other
messages, check the following list table:
PaaS Error Message List:
Message Description
Registration Configuration is
not correct
The Contract ID or Authentication Key you have entered is
either wrong or already being used. Check that the Contract
ID and Authentication Key are correct.
Operation failed, please
contract service center
(Code: xxx)
Contact the service center.
To Next Page
Loading...
