Ricoh SP 3710DN - Page 318

Changing Registered Device/ Main Board
SM Appendix 2-9 M0C3/M0C4/M0C5/M0C6/M0C7
Setting for
PaaS (Only for
CHiNa)
Proxy Function List:
Item Description
Enable Proxy
Function
Check this box to enable the proxy server.
Proxy URL
Set the proxy server address.
The characters that can be input are: 0-9, A-Z, a-z.
Proxy Port
Number
Enter the proxy server port number.
The range is 1-65535.
Authorization
The authorization method of linking to the proxy server.
The options are:
-None
-Basic
-Digest
The default value is “None”.
When “Basic” or “Digest” is selected, the User Name and Password can
be edited and should not be left blank.
When “None” is selected, the User Name and Password are read only.
User Name
The account connecting to the proxy server.
Use ASCII characters only. The max. length is 32.
Password
The password for the user name connecting to the proxy server.
Use ASCII characters only. The max. length is 32.
7. After entering the information, click [OK].
8. If the message “Operation Successful” appears, PaaS registration is complete. For other
messages, check the following list table: