HF RECEIVERS R&S
®
EK 895 / R&S
®
EK 896
User Manual
6164.0717.02_01
- E.1 / E.2 -
Notice:
The HF Receivers R&S
®
EK 895 / R&S
®
EK 896 were tested in
accordance with ETSI EN 300 373-1 V1.2.1 (2002-10) with the
following deviations:
1. ETSI EN 300 373-1 / 7.5 Temperature Tests
In accordance with the R&S
®
EK895 / R&S
®
EK896 specification, the device
was tested at -10 °C to +45 °C (ETSI EN 300 373-1 demands a temperature
range of -15 °C to +55 °C for internally mounted equipment).
2. ETSI EN 300 373-1 / 7.6 Corrosion Test
The device must be operated in a room where it is protected against the effects
of corrosive environment.
To Next Page
Loading...
