V L F > H F R E C E I V E R S
f
R & S E K 8 9 5 / R & S E K 8 9 6
User Manual
f
Special Functions
3.1.18 Special Functions
By actuation of softkeys more, more and SPEC
(R&S EK!895) or of keys MORE and MORE (R&S
EK 896) the special functions menu is called up.
The menu offers the following functions:
f KNOB (tuning knob menu)
> STEP (alter stepwidth)
> ON (enable tuning knob)
> OFF (disable tuning knob)
f PZG (PZG line menus)
> ON (enable level control for PZG line
and!/!or alter level squelch thre>
shold)
> OFF (disable level control for PZG line)
> SPF (enable level control for PZG line,
extended function)
> more (R&S EK 895) or
MORE (R&S EK 896)
> ON (enable syllabic control for PZG
line and!/!or alter syllabic
squelch threshold)
> OFF(disable syllabic control for PZG
line)
f SER (indicate setting of serial interface)
f DEF (default value menu)
> ON (activate default value setting)
> OFF (inhibit default value setting)
f REM (LOC / REM menu)
> LOC (switchover to local operation)
f SSBM (SSB Rx filter mode menu,
only R&S EK 895)
> VOICE
> DATA
f BAR (bargraph mode menu,
only R&S EK 895)
> dBuV
> dS
> NORM
3.1.18.1 Altering the Stepwidth of the
Tuning Knob
Upon actuation of softkeys more, more and
SPEC (R&S EK!895) or of keys MORE and MORE
(R&S EK 896) as well as of softkeys KNOB and
STEP the following display appears:
VAR STEP xxxx _ KHZ ENT
(xxxx=last stored stepwidth )
The flashing cursor (_) indicates that an entry is
being expected. Enter the new stepwidth via
the numeric keypad.
Range of entry: . . . . . . . 1 Hz to 1000 kHz
Resolution: . . . . . . . . . . 1 Hz
The programmed stepwidth for the tuning
knob becomes effective, as soon as in the
operating mode FREQUENCY the cursor is
shifted to the right and out of the frequency
field by means of the cursor control keys.
3.1.18.2 Enabling the Tuning Knob
Actuate softkeys more, more and SPEC (R&S
EK!895) or keys MORE and MORE (R&S EK 896)
as well as softkeys KNOB and ON. The display
ON is now marked by an underline.
3.1.18.3 Disabling the Tuning Knob
Actuate softkeys more, more and SPEC (R&S
EK!895) or keys MORE and MORE (R&S EK 896)
as well as softkeys KNOB and OFF. The display
OFF is now marked by an underline.
6164.0717.02_01
> 3.44 >
To Next Page
Loading...
