V L F > H F R E C E I V E R S
f
R & S E K 8 9 5 / R & S E K 8 9 5
User Manual
f
Switching On and Off
3.2 Control Unit 1 ∫REMOTE∫ (R&S EK 895)
(see Fig. 3.2)
3.2.1 General
The VLF>HF Receiver R&S EK 895 with control unit 1 'REMOTE' does not contain any control
elements other than the power switch. Its control is carried out with the aid of a computer with
control program, Control Unit R&S GB 899 or another receiver (R&S EK 895 with control unit 2
'LOCAL' or Control Unit R&S GB 890, R&S EK 896). In the event that there is no control program for
the computer available or such a program is to be established, the remote control commands (see
Appendix A3) are required.
3.2.2 Switching On
Actuate switch ON.
EIN
.
ON
EIN
.
ON
Æ LED ON is illuminated.
Æ A POWER reset (LED test and BIT) is initiated.
LED Test
OPTION 2
HF>TEIL
.
RF UNIT
ZF / NF PROZESSOR
.
IF / AF PROCESSOR
SYNTHESIZER
OPTION 1
Æ All LEDs must be illuminated.
BIT
Æ Module check
6164.0717.02_01
> 3.71 >
To Next Page
Loading...
