Rohde & Schwarz 890 Series - Preselection R&S FK 890 H1

V L F - H F R E C E I V E R S • R & S E K 8 9 5 / R & S E K 8 9 6
User Manual • Replacement of Modules
4.3.12 Preselection R&S FK 890H1
Removal
1. Make preparations acc. to 4.3.1.
2. Disconnect socket of RF cable W13 (see Fig.
4.15) from plug X82.
3. Disconnect socket of RF cable W1 from
plug X81.
With option 'IF Processor R&S GM 893':
Pull off socket on RF cable W24 connected
to plug X81.
4. Open black extracting levers on preselector
(see Fig. 4.12 (R&S EK 895) or Fig. 4.13 (R&S
EK 896)).
5. Carefully pull out preselector by taking
hold of the black levers.
Installation
Installation is to be carried out in the reverse
order of removal.
6164.0717.02_01
- 4.33 -