V L F > H F R E C E I V E R S
f
R & S E K 8 9 5 / R & S E K 8 9 6
User Manual
f
Replacement of Modules
4.3.7 HF Unit
Removal
1. Make preparations acc. to 4.3.1.
2. Pull off socket on RF cable W7 (see Fig.
4.14) connected to plug X51.
3. Pull off socket on RF cable W2 connected to
plug X52.
4. Pull off socket on cable W3 / W15 con>
nected to plug X53.
5. Pull off socket on RF cable W1 connected to
plug X54.
6. Pull off socket on RF cable W5 connected to
plug X55.
7. Open green extracting levers on HF unit
(see Fig. 4.12 (R&S EK 895) or Fig. 4.13 (R&S
EK 896)).
8. Pull out HF unit by taking hold of green le>
vers.
Installation
Installation is to be carried out in the reverse
order of removal.
6164.0717.02_01
> 4.28 >
To Next Page
Loading...
