Rohde & Schwarz 890 Series - Inquiry of Operating Status; Inquiry of Scanning Status

V L F > H F R E C E I V E R S f R & S E K 8 9 5 / R & S E K 8 9 6
User Manual f System Functions
A3.8.6 Inquiry of Operating Status
Command syntax:
Code: M
Reply
Parameter: ................... a
0 = manual
1 = frequency scanning
2 = channel
3 = channel scanning with freely pro>
grammed channel list
4 = channel scanning
Example:
Inquiry of the current operating status of the
VLF>HF receiver
Command = rAxxM??
Æ Reply = rAxxM0?
The receiver is in the operating mode MANUAL
(see A3.2.1).
A3.8.7 Inquiry of Scanning Status
Command syntax:
Code: CO
Reply
Parameter: ................... a
0 = no scanning
1 = frequency scanning
3 = channel scanning with freely pro>
grammed channel list
4 = channel scanning
Example:
Inquiry which scanning process was last acti>
vated
Command = rAxxCO??
Æ Reply = rAxxCO0?
There was no scanning process activated.
6164.0717.02_01
> A3.40 >