V L F > H F R E C E I V E R S
f
R & S E K 8 9 5 / R & S E K 8 9 6
User Manual
f
Installation into a 19" Rack
2.4.2.3 Installation of Two Receivers R&S EK 895 with Parts Set R&S KA 890L1
1. Make preparations acc. to 2.4.2.1.
2. Fix front (10) and rear connecting elements
(20) with two screws each (30) to both
units.
3. Slide one front connecting elements into
the other until a stop is reached.
4. Fix the two rear connecting elements to
each other by means of two screws (40) and
spring washers (50).
5. Fix each of the two front grips (60) and
brackets (80) to the units by means of two
screws (70) and toothed washers (100).
6. Remove paper from adhesive layer and
affix guiding rails (102, 104) to the equip>
ment bottom, previously cleaned with iso>
propyl alcohol for example.
7. Secure the receivers to the rack by means
of four screws.
Fig. 2.4 Parts Set R&S KA 890L1
6164.0717.02_01
> 2.6 >
To Next Page
Loading...
