Rohde & Schwarz 890 Series - A3.5.4; Channel Scanning Parameters

V L F > H F R E C E I V E R S f R & S E K 8 9 5 / R & S E K 8 9 6
User Manual f Channel Scanning
A3.5.4 Channel Scanning Parameters
Command syntax:
Note:
Inhibited channels (see A3.7.10) are not called up.
Code: CS
Parameter: .................... a,b
Possible entries / replies
a (start channel): ............ 0 to 999
b (stop channel): ............. 0 to 999
Example 1:
Entry of the following scanning parameters:
f Start channel = 700
f Stop channel = 900
Command = rAxxCS700,900?
Example 2:
Inquiry of the programmed scanning para>
meters
Command = rAxxCS??
Æ Reply = rAxxCS700,900?
For scanning the start channel 700 and the stop
channel 900 are programmed.
6164.0717.02_01
> A3.17 >