V L F > H F R E C E I V E R S
f
R & S E K 8 9 5 / R & S E K 8 9 6
User Manual
f
Separate Functions 1
3.1.20.2 Switching the Notch Filters On or
Off
Note:
In modulation mode ISB the notch filter acts
upon the monitoring sideband only.
By actuating key ENT and softkey NOTC the
two notch filters are switched on or off.
Once the notch filters are activated, a black bar
will appear above NOTCH in the status line.
The notch filters can be tuned in accordance
with 3.1.10.
3.1.20.3 Switching the Noise Blanker On
or Off
By actuating key ENT and softkey NB the noise
blanker is switched on or off.
Once the noise blanker is activated, a black bar
will appear above NB in the status line.
3.1.20.4 Switching the Squelch Function
On or Off
Note:
The squelch function is only effective in the SSB
mode.
By actuating key ENT and softkey SQ the
squelch function is switched on or off.
Once the squelch function is activated, a black
bar will appear above SQ in the status line and
the squelch type setting is activated (see
3.1.24).
3.1.20.5 Switching the Preamplifier On or
Off
By actuating key ENT and softkey PAMP the
preamplifier is switched on or off.
Once the preamplifier is activated, a black bar
will appear above PAMP in the status line.
Separate Functions Menu 1
IND PAMP NB SQ NTCH
ENT
PREAMP NB SQ NOTCH PBT
see 3.1.10
6164.0717.02_01
> 3.60 >
To Next Page
Loading...
