V L F > H F R E C E I V E R S
f
R & S E K 8 9 5 / R & S E K 8 9 6
User Manual
f
Special Functions
3.1.18.14 Selecting the SSB Rx Filter Mode
(R&S EK 895)
Upon actuation of softkeys more, more, SPEC ,
more and softkey SSBM calls up the following
SSB Rx filter mode menu:
f VOICE
f DATA
The currently effective SSB Rx filter mode is in>
dicated on the display by an asterix of the rele>
vant value, e.g. VOICE*.
The setting of the own local>controlled re>
ceiver is displayed by an underline, e.g. DATA
.
Note:
When changing the modulation mode via the
remote interface the SSB Rx filter mode is reset
to DATA. The change of the modulation mode
via the MMI has no effect on the SSB Rx filter
mode.
3.1.18.15 Selecting the Bargraph Mode
(R&S EK 895)
Upon actuation of softkeys more, more, SPEC ,
more and softkey BAR calls up the following
bargraph mode menu:
f dBoV (resolution of 1 dBoV)
f dS (resolution of 0.5 S)
f NORM (resolution of 5 dBoV)
The currently effective bargraph mode is idi>
cated on the display by an underline of the
relevant value, e.g. dS
.
If setting dBoV or dS is selected, the receiver
level will be displayed instead of modulation
mode and control type and time.
After pressing softkey more and after making
an entry, the modulation mode and control
type will be displayed for 3 s.
0
30
60
90
120
RF
dBoV
CHANNEL
BW
BFO
FREQUENCY
kHz
0
30
60
90
120
RF
dBoV
CHANNEL
BW
BFO
FREQUENCY
kHz
GAIN
MODULATION
FAST
PREAMP NB SQ NOTCH PBT
PREAMP NB SQ NOTCH PBT
Bargraph mode: NORM
Bargraph mode: dBoV
6164.0717.02_01
> 3.50 >
To Next Page
Loading...
