Rohde & Schwarz 890 Series - A1. Settings; A1.1 Preparations

V L F > H F R E C E I V E R S f R & S E K 8 9 5 / R & S E K 8 9 6
User Manual f Preparations
A1. Settings
A1.1 Preparations
1. Switch the VLF>HF receiver off.
Æ LED POWER is dark
(control unit 2 ∫LOCAL∫ (R&S EK!895, = op>
tion 'Control Unit R&S GB 890') or control
unit (R&S EK!896)).
POWER
Æ LED ON is dark
(control unit 1 ∫REMOTE∫ (R&S EK 985)).
EIN
.
ON
2. Disconnect mains cable from plug X67.
3. Undo and remove four screws (1, Fig. A1.2
(R&S EK!895) or Fig. A1.3 (R&S EK!896)) fix>
ing the rear panel stands.
4. Remove rear panel stands.
5. Undo and remove the cover by means of a
screw driver.
6164.0717.02_01
> A1.1 >