V L F > H F R E C E I V E R S
f
E K 8 9 5 / E K 8 9 6
User Manual
f
Application
User Information
Purpose of the Manual
This Manual provides all information the operators and service staff need to maintain levels 1 and
2 of repairs.
It contains all necessary information and instructions concerning the installation, putting into
operation and control of the unit, plus troubleshooting instructions down to module level. In case
of trouble this allows straightforward error localization as well as easy replacement of the module
concerned. This permits the unit to be put back into proper working order and operation with
minimum delay.
We recommend to keep complete spare units / modules in store.
Measuring Units
In this Manual the basic SI measuring units and units coherently derived from them are used by
preference. In exceptional cases units legally derived from the SI units acc. to DIN 1301 may also be
used.
Symbols
The different symbols used in this Manual have the following meaning:
f
= listing
Æ = steps to be followed
6045.6712.12.07
> Z.1 / Z.2 >
To Next Page
Loading...
