V L F > H F R E C E I V E R S
f
R & S E K 8 9 5 / R & S E K 8 9 6
User Manual
f
Control and Display Elements
Description
In the bandwidth field the currently active
IF filter (e.g. with a bandwidth of 0.3 kHz)
is displayed.
For
R&S EK 895 only:
Via the bandwidth selection menu (see
3.1.9) or the tuning knob (34, only with
option EK 85S7) the bandwidth can be
altered.
For
R&S EK 896 only:
Via the bandwidth keys (21) or the
bandwidth selction menu (see 3.1.9) or
the tuning knob (34) the bandwidth can
be altered.
Possible displays in kHz:
0.1 > 0.3 > 0.4 > 0.6 > 0.8 > 1.0 > 1.5 > 1.8 > 2.1
> 2.4 > 2.7 > 3.1 > 3.6 > 4.0 > 4.8 > 6.0 > 8.0
Resolution: 100 Hz
Possible displays in kHz (R&S EK 896, R&S
EK 895 with option R&S EK!895S7)
1)
:
0.1 to 9.0 (neighbouring bandwidths
differ by approx. 3 %)
Resolution: 100 Hz
In the BFO field the currently effective
BFO frequency (e.g. 0.85 kHz) is displayed.
Not with modulation modes AM, F7B, FM
and ISB.
If the LED assigned to key BFO (28) is
illuminated, the step keys (30) and the
numeric keypad (27) act upon the BFO
field.
Display range: >5.00 to 5.00 kHz
Resolution: 10 Hz
For
R&S EK 895 only:
The BFO frequency can also be altered by
using the tuning knob (34) and the cursor
control keys (1) acc. to 3.1.13.3 and .4.
No.
7
8
Control or display
element
Design
Bandwidth field
consisting of the
display
BW kHz and two
7>segment
display elements
BW
kHz
BFO
kHz
BFO field
consisting of the
display
kHz BFO and
four 7>segment
display elements
for EK 895 only
1)
In addition display
in the menu line
with a resolution
of 1 Hz
6164.0717.02_01
> 3.78 >
To Next Page
Loading...
