V L F > H F R E C E I V E R S
f
R & S E K 8 9 5 / R & S E K 8 9 6
User Manual
f
Control and Display Elements
Description
The tuning knob can be disabled acc. to
3.1.18.3 or enabled acc. to 3.1.18.2. The
blocked state of the tuning knob is auto>
matically cancelled when the receiver is
switched off. In addition the stepwidth of
the tuning knob can be freely pro>
grammed acc. to 3.1.18.1 or can be altered
via the cursor control keys (1).
f If the LED assigned to key FRQ (32) is
illuminated, the tuning knob can be
used to alter the frequency.
f If the LED assigned to key CH (31) is il>
luminated, the tuning knob can be
used to alter the channel number.
f For R&S EK 895 only: If the LED as>
signed to key BFO (28) is illuminated,
the tuning knob can be used to alter
the BFO frequency.
f For R&S EK 895 with option R&S
EK!895S7 only: After actuation of soft>
keys BW and VAR, the bandwidth can
be altered quasi>continuously by
means of the tuning knob.
f For EK 896 only: After actuation of
key BW and softkey VAR, the band>
width can be altered quasi>con>
tinuously by means of the tuning
knob.
Once the minimum or maximum value is
reached, the display does not change any
further when turning the tuning knob.
The flashing cursor indicates that an entry
via the numeric keypad (27) is being ex>
pected.
After an entry the respective character
(numeral, sign or decimal point) is indi>
cated and the cursor is dislocated to the
right by one digit (maximally by one digit
beyond the permitted entry format).
Control or display
element
DesignNo.
34
35
Rotary knob
24 steps /
turn
6164.0717.02_01
> 3.93 >
To Next Page
Loading...
