PREPARATION FOR USE
Safety Notes, Unpacking and Checking, Operating Functions, Installation,
Cabling, Cables for Control and Status Data
6164.0717.02_01 > 3 / 4
User Manual
VLF > HF RECEIVERS
R&S EK 895 R&S EK 896
OPERATION
Control Unit 2 'LOCAL' (R&S EK 895, = Option 'Control Unit R&S GB 890') or
Control Unit
(R&S EK 896), Control Unit 1 'REMOTE' (R&S EK 895), Control and
Display Elements
MAINTENANCE AND TROUBLESHOOTING
List of Faults, Simple Measurements, Replacement of Modules
SETTINGS
Operating Voltage, External Frequency Standard, RS232C > RS485 Interface
Parameters, Direction of Rotation for the HF Control, AF and AF2 Output Level,
Type of Current Source
External Interfaces
Connections for Headphones, Antenna, Frequency Standard, FET Analyzer,
Spectrum Display, Data Lines, Control Lines, HF Selector and Mains
Remote Control
Operating Modes, Basic Settings, Frequency Scanning, Channel Scanning,
Channel Scanning with Freely Programmable Channel List, Special Functions,
System Functions, List of Commands
CHARACTERISTICS
Application, Design and Functioning of the VLF>HF Receivers, Design and
Functioning of Modules, Technical Data, Explanation of Models
List of Abbreviations
Remote Control Software
To Next Page
Loading...
