V L F > H F R E C E I V E R S
f
R & S E K 8 9 5 / R & S E K 8 9 6
User Manual
f
Fault Recognition During Operation (CM)
If during operation the CM status changes, the display changes as follows:.
Synthesizer defective
or IF / AF processor defective
or both synthesizer and IF / AF processor defective
f Carry out BIT acc. to 4.2.2.4.
f In fixed channel operation, actuate key MENU and switch receiver over to local operation acc.
to 3.1.18.7. Then carry out BIT acc. to 4.2.2.4.
6164.0717.02_01
> 4.8 >
To Next Page
Loading...
