Rohde & Schwarz 890 Series - Page 385

V L F > H F R E C E I V E R S f R & S E K 8 9 5 / R & S E K 8 9 6
User Manual f List of Commands
6164.0717.02_01
> A3.45 >
Code Function (entry in) Input
Output
(requested with ?)
Remark
CO1 Inquire scanning status 0= no scanning
1= frequency
scanning
3= channel scan>
ning with
freely pro>
grammed
channel list
4= Channel
scanning
see A3.8.7
CS Channel scanning
parameters
Start channel
Stop channel
0 to 999,
0 to 999
0 to 999
0 to 999
see A3.5.4
D DGC value (dBoV
EMF
) 0 to 120 0 to 120 see A3.3.8
DEF Default setting 0 to 1 0 =disable
1 = enable
see A3.7.25
DF Inquire frequency deviation
and offset
Lower frequency (x 10 Hz)
Upper frequency (x 10 Hz)
>1200 to 1200
>1200 to 1200
see A3.7.17
DS Digital level threshold
(dBoV
EMF
)
0 to 120 0 to 120 see A3.4.5
see A3.7.4
DT Control time 0 to 4 0= 25 ms
1= 150 ms
2= 500 ms
3= 1 s
4= 3 s
see A3.3.7
DWC Dwell time (ms)
Channel scanning with free>
ly programmed channel list
10 to 65535 50 to 65535 see A3.6.5
DWQ Dwell time (ms)
Channel scanning
10 to 65535 50 to 65535 see A3.5.5
DWS Dwell time (ms)
Frequency scanning
10 to 65535 50 to 65535 see A3.4.6
ERR Inquire error status 0,0= no error see A3.8.8
F Frequency (Hz) 0 to 30000000 0 to 30000000 see A3.3.1