Rohde & Schwarz 890 Series - Page 388

V L F > H F R E C E I V E R S f R & S E K 8 9 5 / R & S E K 8 9 6
User Manual f List of Commands
6164.0717.02_01
> A3.48 >
Code Function (entry in) Input
Output
(requested with ?)
Remark
IF IF signal
Parameter a
Type of frequency
Parameter b
Control type
Parameter c
CFrequency (Hz)
0 to 2,
0 to 1,
0 to 40000
0= no signal
1= signal with
variable
frequency
2= signal with
fixed fre>
quency
(option)
0= no control
1= AGC
0 to 40000
see A3.8.10
K Edit channel contents
Inquire current receiver
setting
0 to 999 0 to 999
≤≥ =
MANUAL
0 to 999=
CHANNEL
0,e to 999,e=
Channel inhibited
see A3.7.12
see A3.7.13
Ks, Call up a channel 0 to 999 see A3.7.11
L Inquire receive level (dBoV) 0 to 120 see A3.7.9
LX Inquire receive level,
extended (dBoV)
>20 to 120 see A3.7.26
M Inquire operating status 0= MANUAL
1= FREQUENCY
SCANNING
2= CHANNEL
see A3.8.6
M1 3= CHANNEL
SCANNING
with freely
programmed
channel list
4= CHANNEL
SCANNING
see A3.8.6
MS Master / slave operation 0 to 99 see A3.7.16
NB Switch noise blanker on or
off
0 or 1 0= OFF
1= ON
see A3.7.19