Rohde & Schwarz R&S RTB2004 - Page 439

Remote Control Commands
R&S
®
RTB2000
431User Manual 1333.1611.02 ─ 04
Suffix:
<m>
.
0..15
Selects the logic channel
<p> 1..2
Selects the logic pod
Return values:
<CurrentState> Range: 0 | 1
Usage: Query only
15.12.1.2 Logic Analyzer Configuration
DIGital<m>:DISPlay....................................................................................................... 431
DIGital<m>:TECHnology.................................................................................................431
LOGic<p>:THReshold.................................................................................................... 432
DIGital<m>:THReshold...................................................................................................432
LOGic<p>::HYSTeresis.................................................................................................. 432
DIGital<m>:HYSTeresis..................................................................................................432
DIGital<m>:SIZE............................................................................................................432
DIGital<m>:POSition...................................................................................................... 433
DIGital<m>:LABel.......................................................................................................... 433
DIGital<m>:LABel:STATe............................................................................................... 433
LOGic<p>:STATe...........................................................................................................433
LOGic<p>:THReshold:UDLevel....................................................................................... 434
DIGital<m>:DISPlay <State>
Enables and displays the indicated logic channel, or disables it.
Suffix:
<m>
.
0..15
Number of the logic channel
Parameters:
<State> ON | OFF
*RST: OFF
DIGital<m>:TECHnology <ThresholdMode>
Selects the threshold voltage for various types of integrated circuits and applies it to
the channel group to which the indicated logic channel belongs.
Suffix:
<m>
.
0..15
Number of the logic channel
Mixed Signal Option (Option R&S RTB-B1)