Rohde & Schwarz RTM2032 - Page 202

Protocol Analysis
R&S
®
RTM20xx
187User Manual 1317.4726.02 ─ 01
Start of frame..............................................................................................................187
End of frame................................................................................................................187
Frame <type>..............................................................................................................187
└ Error..............................................................................................................187
└ Overload.......................................................................................................188
└ Data..............................................................................................................188
└ Remote.........................................................................................................188
└ Data or remote..............................................................................................188
Error <type>................................................................................................................188
└ Stuff bit..........................................................................................................188
└ Form..............................................................................................................188
└ Acknowledge.................................................................................................188
└ CRC..............................................................................................................189
Identifier......................................................................................................................189
└ Frame type....................................................................................................189
└ Symbolic ID...................................................................................................189
└ Identifier Setup..............................................................................................189
└ ID type................................................................................................190
└ Compare.............................................................................................190
└ Bit........................................................................................................190
└ State...................................................................................................190
└ Byte.....................................................................................................190
└ Value...................................................................................................190
Identifier and data.......................................................................................................190
└ Data Setup....................................................................................................190
└ Data Length........................................................................................191
Start of frame
Triggers on the first edge of the dominant SOF bit (synchronization bit).
Remote command:
TRIGger:A:CAN:TYPE on page 407 (STOFrame)
End of frame
Triggers on the end of the frame (7 recessive bits).
Remote command:
TRIGger:A:CAN:TYPE on page 407 (EOFrame)
Frame <type>
Selects the frame type to be triggered on. The selected frame type is indicated in the
softkey name.
Remote command:
TRIGger:A:CAN:TYPE on page 407 (FTYPe)
TRIGger:A:CAN:FTYPe on page 408
Error ← Frame <type>
An error frame is sent by a node that has detected an error.
CAN (Option R&S RTM-K3)