Rohde & Schwarz RTM2032 - Page 298

Remote Control
R&S
®
RTM20xx
283User Manual 1317.4726.02 ─ 01
TIMebase:SCALe <TimeScale>
Sets the horizontal scale for all channel and math waveforms.
Parameters:
<TimeScale> Range: 1,00E-009 to 50; lower limits are possible if zoom or
FFT is enabled.
Increment: 1, 2, 5 progression, for example, 1 ms/div, 2 ms/div,
5 ms/div, 10, 20, 50...
*RST: 1,00E-004
Default unit: s/div
TIMebase:
RATime?
Queries the real acquisition time used in the hardware. If FFT analysis is performed, the
value can differ from the adjusted acquisition time (TIMebase:ACQTime).
Return values:
<HWAcqTime> Range: Depends on various settings
Default unit: s
Usage: Query only
TIMebase:ACQTime <AcquisitionTime>
Defines the time of one acquisition, that is the time across the 10 divisions of the diagram:
Timebase Scale*10.
Parameters:
<AcquisitionTime> *RST: 1 ms
Default unit: s
TIMebase:RANGe <AcquisitionTime>
Defines the time of one acquisition, that is the time across the 10 divisions of the diagram:
Timebase Scale*10.
Parameters:
<AcquisitionTime> Range and increment depend on time base and other settings
*RST: 1 ms
Default unit: s
TIMebase:DIVisions?
Queries the number of horizontal divisions on the screen.
Return values:
<HorizDivCount> Range: 10 to 10
Increment: 0
*RST: 10
Default unit: div
Command Reference