Remote Control
R&S
®
RTM20xx
319User Manual 1317.4726.02 ─ 01
DISPlay:PERSistence:CLEar
Removes the displayed persistent waveform from the screen.
Usage: Event
Waveform, Auxilary Cursors and Grid Settings
DISPlay:STYLe..............................................................................................................319
DISPlay:GRID:STYLe.....................................................................................................319
DISPlay:STYLe <Style>
Defines how the waveform data is displayed
Parameters:
<Style> VECTors | DOTS
VECTors
Individual data points are connected by a line.
DOTS
Only the data points are displayed.
*RST: VECT
DISPlay:GRID:STYLe <Style>
Defines how the grid is displayed.
Parameters:
<Style> LINes | RETicle | NONE
LINes
Displays the grid as horizontal and vertical lines.
RETicle
Displays crosshairs instead of a grid.
NONE
No grid is displayed.
*RST: LIN
Virtual Screen
DISPlay:VSCReen:ENABle.............................................................................................319
DISPlay:VSCReen:POSition............................................................................................320
DISPlay:VSCReen:ENABle <Enable>
Enables or disables the virtual screen. If enabled, the virtual screen has 20 divisions, 8
of them are displayed.
Command Reference
To Next Page
Loading...
