Rohde & Schwarz RTM2032 - Page 450

Remote Control
R&S
®
RTM20xx
435User Manual 1317.4726.02 ─ 01
15.2.14.1 Digital Channels
DIGital<m>:DISPlay.......................................................................................................435
DIGital<m>:TECHnology.................................................................................................435
DIGital<m>:THReshold...................................................................................................435
DIGital<m>:THCoupling..................................................................................................436
DIGital<m>:Hysteresis....................................................................................................436
DIGital<m>:LABel..........................................................................................................436
DIGital<m>:POSition......................................................................................................436
DIGital<m>:LABel:STATe...............................................................................................437
DIGital<m>:SIZE............................................................................................................437
DIGital<m>:DISPlay <State>
Enables and displays the indicated digital channel, or disables it.
Suffix:
<m>
.
0..15
Number of the digital channel
Parameters:
<State> ON | OFF
*RST: OFF
DIGital<m>:TECHnology
Selects the threshold voltage for various types of integrated circuits and applies it to the
channel group to which the indicated digital channel belongs.
Suffix:
<m>
.
0..15
Number of the digital channel.
Channel groups: 0..3; 4..7; 8..11; 12..15
Parameters:
<ThresholdMode> TTL | ECL | CMOS | MANual
TTL: 1.4 V
ECL: -1.3 V
CMOS: 2.5 V
MANual: Set a user-defined threshold value with DIGital<m>:
THReshold
*RST: MAN
DIGital<m>:THReshold
Sets the logical threshold for the channel group to which the indicated digital channel
belongs.
Command Reference