MFP stand (only for 44“): Intended to integrate ROWE Scan 600 into an inkjet
printer (up-to-date list of compatible printers on request). Feeding height: 1,200
mm to 1,240 mm.
PC bracket supplementing stand MFP: Intended to accommodate a conventional
computer housing.
ROWE contact rule
Height adjustment
In order to be able to scan originals with a thickness exceeding 1.5 mm, ROWE Scan 600
is also available with a height adjustment feature. The maximum document thickness
then is 30 mm.
Scan width up to 60"
In order to be able to scan originals with a width exceeding 44", ROWE Scan 600 is also
available in a wider design. By default, the maximum scan width then is 55" and can be
extended to 60". The maximum document width is 63" and the document thickness is 1.5
mm as in case of the 44" model. This option can also be combined with the height
adjustment option to achieve a maximum document thickness of 30 mm.
To Next Page
