Managing the Access Point
Enabling Other Management Access Options
ZoneFlex Indoor Access Point 9.8.1 User Guide, 800-70601-001 Rev C 170
4 Click Update Settings to save your changes. A confirmation message appears
at the top of the page.
You have completed configuring the management access options.
NOTE Remember to open any relevant firewall ports between the AP and the
firmware upgrade/management server. For example, if HTTPS is used for firmware
upgrades, open TCP port 443 on the firewall to allow connections through port 443.
If FlexMaster server is used, open TCP ports 80 and 443 for HTTP/HTTPS
communications, and TCP port 8082 for AP wake-up commands.
Continue with the following, as required:
• Viewing FlexMaster Management Status
• Pointing the AP to FlexMaster
Digest-authentication
Username/Digest-
authentication password
This information is automatically generated by the AP and
used for authentication with FlexMaster. Change this value
only
if you want the AP to connect to another access
control server (ACS).
Periodic FlexMaster Inform
Interval
Interval at which the device should attempt to contact
FlexMaster.
Table 59. TR-069 and SNMP Management Options (Continued)
Option Description
To Next Page
Loading...
