Installing the Access Point
Step 1: Preconfigure the Access Point
ZoneFlex Indoor Access Point 9.8.1 User Guide, 800-70601-001 Rev C 88
For your reference, the default wireless settings on the Access Point are listed in
Tab l e 43 .
Configure Common Wireless Settings
1 On the left menu of the Web interface, click Configuration > Wireless (Radio
2.4G or Radio 5G on dual band APs). The Configuration > Common page
appears.
NOTE For dual band APs (ZoneFlex R300, 7982, 7962, 7372, 7363 and 7055),
the two radios (2.4GHz and 5GHz) need to be configured separately on the Web
interface. To configure the common wireless settings, click Configuration > Radio
2.4G or Radio 5G. The rest of the configuration procedures are the same as for
other models.
Figure 42. The Configuration > Wireless > Common tab
Table 43. Default wireless settings
Setting Default Value
SSID (network name) Wireless 1 to Wireless 8 (2.4 GHz Radio)
Wireless 9 to Wireless 16 (5 GHz Radio - only
available on dual radio APs)
Encryption (security) Disabled on all WLANs
Default management IP address
192.168.0.1
To Next Page
Loading...
