Installing the Access Point
Step 1: Preconfigure the Access Point
ZoneFlex Indoor Access Point 9.8.1 User Guide, 800-70601-001 Rev C 91
NOTE In addition to setting the FlexMaster server URL manually on the Access
Point, you can also use DHCP Option 43 or DNS to point the Access Point to the
FlexMaster server. For more information, refer to the FlexMaster User Guide.
1 On the menu, click Administration > Management.
2 Scroll down the page to the TR069 / SNMP Management Choice section.
Figure 44. Type the FlexMaster server URL
3 Verify that the Auto option is selected.
4 In FlexMaster Server URL, type the URL of the FlexMaster server on the
network. You can use either http or https to connect to the URL and include
either the host name or IP address of the FlexMaster server in the URL. The
following are examples of valid FlexMaster server URLs:
http://flexmaster/intune/server
https://flexmaster/intune/server
http://192.168.20.1/intune/server
https://192.168.20.1/intune/server
5 Click Update Settings to save your changes.
You have completed setting the FlexMaster server address on the Access Point.
To Next Page
Loading...
