Configuration Guide Configuring CLI
disable Turn off privileged commands
disconnect Disconnect an existing network connection
enable Turn on privileged commands
exit Exit from the EXEC
help Description of the interactive help system
lock Lock the terminal
ping Send echo messages
show Show running system information
telnet Open a telnet connection
traceroute Trace route to destination
2. Enter a space and a question mark (?) after a keyword of a command to list the next keyword or variable associated
with the keyword.
For example
Ruijie(config)#interface ?
Aggregateport Aggregate port interface
Dialer Dialer interface
GigabitEthernet Gigabit Ethernet interface
Loopback Loopback interface
Multilink Multilink-group interface
Null Null interface
Tunnel Tunnel interface
Virtual-ppp Virtual PPP interface
Virtual-template Virtual Template interface
Vlan Vlan interface
range Interface range command
If the keyword is followed by a parameter value, the value range and description of this parameter are displayed as
follows:
Ruijie(config)#interface vlan ?
<1-4094> Vlan port number
3. Enter a question mark (?) after an incomplete string of a command keyword to list all command keywords starting with
the string.
For example
To Next Page
Loading...
