Ruijie RG-WLAN Series

Configuration Guide Configuring FAT APs
Scenario
Figure 1-10
FAT APIf one-key WLAN configuration needs to be performed on the AP equipment in a FAT AP
environment, then:
Configuration
Steps
 commands to perform one-key WLAN configuration on the AP equipment:
FAT AP
Ruijie# configure terminal
Ruijie(config)# autowifi
Verification
 Run the show running-config command to check the one-key WLAN configuration.
!
end
1.5 Monitoring
Displaying
Description
Command
Displays the configurations of a FAT AP.
show running-config
Displays the radio information and
configurations of a WNIC.
show dot11 wireless interface-num
Displays the connection information of a
WNIC.
show dot11 associations H.H.H interface-name
Displays information about all users
connected to a WNIC.
show dot11 associations all-client
Displays a created BSS list.
show dot11 mbssid
Displays the online status and capability
information of all RF interfaces.
show dot11 radio-status