Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring Web Authentication
Configuration Steps
 Configuring the Smart Authentication in Global Configuration Mode
Command
web-auth sta-perception enable
Parameter
Description
N/A
Command
Mode
Global configuration mode
Usage Guide
N/A
Verification
 Simulate the scenario where an STA is associated with an SSID for the second time during WeChat Web authentication
(including WeChat follow-up authentication and WeChat-based Wi-Fi connection authentication). Check whether the
STA gets online without authentication.
Configuration Example
 Enabling the Smart WeChat Web Authentication
Configuration
Steps
 Enable the smart WeChat Web authentication.
 The configuration is optional.
Ruijie(config)#web-auth sta-perception enable
Verification
 Check whether the configuration is successful.
Ruijie(config)#show running-config
1.4.42 Configuring User Detection Under WLANSEC
Configuration Effect
 After online user detection under WLANSEC is configured, if the traffic of a user is lower than the threshold within a
specified interval, the device automatically forces the user to go offline, to prevent economic loss for the user due to
continuous charging.
Notes
 The function has the same effect as the SCC command executed in global configuration mode: offline-detect interval
interval thredshold thredshold. The configuration of user detection under WLANSEC has a higher priority than the SCC
command executed in global configuration mode.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English